Solar Boost 2000E 25A 12V MPPT Charge Regulator

Solar Boost controllers increase charge current by operating the PV module in a manner that allows the module to produce all the power it is capable of. A conventional charge controller simply connects the module to the battery when the battery is discharged. When the 75W module in this example is connected directly to a battery charging at 12 volts its power production is artificially limited to about 53 watts. This wastes a whopping 22 watts or nearly 30% of the available power!

Output Current Rating: 25 Amp Maximum
Nominal System Voltage: 12 VDC
PV Open Circuit Voltage: 30 VDC Maximum
Standby Power Consumption: 17mA Typical
Charge On Power Consumption: 70mA Typical


Spec Sheet